It’s vital to build your shed on a stable, level location—and never in a wet, low-lying area or on a downward slope. And no matter how well a shed is constructed, it won’t hold up on a weak base. A proper foundation is key, one that sets the shed slightly off the ground to aid water drainage and reduce moisture transfer. There are different foundation options, depending on where you live and the size and intended use of the shed, so bone up on the fundamentals and assess your options with this advice from the LP Outdoor Building Solutions team.
Because My Shed Plans does not promise anything beyond belief, the product’s foundation is pretty strong. People have enjoyed choosing between the collections of shed layouts and building it themselves. It’s a great activity for the whole family, since it’s all well planned out. It can be a bonding experience, the way a team building exercise at work is.
After laying out the 12 blocks, use a straight 2 x 4 and a 4-ft. level to ensure that all the blocks are level. Shim up any low blocks with strips of asphalt roofing, cedar shingles or 2-in.-thick concrete patio block. Next, form each front and rear band joist by nailing a 2 x 6 to a 2 x 8 mudsill. Set the mudsills on top of the blocks running across the front and rear of the shed. Cut a third 2 x 8 mudsill to fit along the tops of the center row of foundation blocks.

The trick for learning how to build a storage shed is to stretch the line across a scrap of wood at each end so there’s a space between the line and the part you’re straightening. On a wall, for example, tack small scraps of 1/2-in. plywood at each end of the top plate and stretch a line very tightly over the plywood. Then use a third scrap as a gauge to check the distance between the line and the lumber. Use braces or whatever is needed to adjust the top plate until the gauge just fits. Now your top plate will be perfectly straight.


Wooden sheds have a characteristic look that can mix in well with the environment In spite of the quality of wood, after some time, untreated and ignored wood can decay, split, twist or wind up noticeably powerless to form and mould, so wood sheds ought to be dealt with for insurance with stain and varnish. Wood sheds require regular support. This incorporates keeping plant matter, flotsam and jetsam from heaping up adjacent to the dividers and on the rooftop, and infrequent decay sealing with the additive.
Most of the Amish Built Sheds Unlimited storage sheds can be custom ordered as a DIY STORAGE SHED KIT PACKAGE for assembly on-site. If for any reason installing a completed storage building into the backyard is not an option or if you are simply a handyman at heart and would like to try your own skills, then a Economy Shed Kit, Vinyl Sided Storage Shed Kit, Classic Amish Sheds Kit or a Premier Garden Storage Shed Kit might work perfectly for you.
Listen, about the My Shed Plans Scam… all you can say is haters are gonna hate. There are way too many people on the web going about trying to ruin things for others. It probably makes them feel bigger than the basement of their parents’ house allows. In regards to your My Shed Plans product, it looks like a great deal. 12,000 shed plans, all in one package? Seriously, is there any plan that’s missing?
If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
We now need to create a base that we can nail the frames for the walls into.  We did this with four 2x8's and some bent i-bolts along with a lot of mortar.  The basic process was that we bent the bottoms of the i-bolts after heating them with a blow torch, and then anchored these in some of the holes in the cinderblocks with a lot of mortar.  Then we drilled holes in the 2x8's where the i-bolts were and put these on top and screwed them in.  The frames can now be solidly attached to the base with the framing hammer.
• Stagnant waters — As much as the wood is coated to protect it from water, it would still be advisable to keep the wood away from stagnant waters. This is as the wood coating is not a permanent coat and so is the wood is exposed to water it will get damaged over time. The best way to avoid water paddles near the shed is building gutter systems on its roof which directs the water to a tank or a pool.

The advertising was incredibly misleading. The early indications (at least via ********) are that you can purchase downloadable shed plans. Further claims are made that **** ********* is offering something unique in the detail and instruction, such that someone with no building experience could purchase material, fabricate, and build these sheds. First, that is not at all the case. most of these "plans" are only one-page shots. Second, most of the plans couldn't be build even by someone who is in construction or familiar with building. This stops just short of being a SCAM. At the very least, it's extremely misleading. **** ********* should be ashamed of himself.


Nothing dresses up a shed like brackets. They’re the ultimate low-effort, high-impact feature. In some cases they also provide extra support for your gable-end overhang. Depending on the design, you can build brackets from 4x4s or by laminating 2-by boards. Make a full-scale drawing to work out the details. Then build the brackets and attach them to the shed. Install the brackets tight to the underside of the overhang, and then notch the fascia board to fit over them.
· Gable shed — they are also common due to their stylish two-faced roof that meets at the center forming a peak. Their roof shapes are conducive as they provide adequate space, but not as much as the gambrel styled sheds. They provide adequate spaces for storage of garden tools. They also accommodate larger items as motorcycles. The property that makes these sheds become common is their stylish shape that blends in well with any compound with a house of any design.
There are plenty of jobs to do out in the yard, and most of these tasks require tools and machines like weedwhackers, lawn mowers, edgers, and everything else. The garage can only hold so much, because it’s meant to store your car or cars. Heaven knows you aren’t going to be storing that equipment inside the house once you’re through with it, so an outdoor shed is necessary in every home’s backyard. It can cost a fortune to hire a woodworker or carpenter to customize an outdoor storage space for you. And if you take it upon yourself to build a shed, you’ll probably be left with nothing but frustration and problems.
Build the framework for all four walls. To account for the fact that the front and back walls are different from each other (due to the doorframe in the front) and the side walls must both be sloped (to prevent rain from collecting on the roof), each of these will have to be tackled somewhat differently. It’s easiest to construct the back first, the front second, and the two sides last, as shown in the numbered image below. See How to Frame a Wall for more information before you read the instructions below.[5]

Level the ground (if necessary) and install deck piers along a grid to support the shed. The piers will allow you to string support beams beneath the floor of the shed. In the example design, the piers are spaced 6 feet (1.8 m) apart in one direction and 4 feet (1.2 m) apart in the other for a total grid area of 12 x 8 feet. This is convenient because once you lay supports along this grid, it will take exactly three standard 4- by 8-foot plywood sheets to cover it.[1]
• Wastage of space — this is one of the greatest mistakes one can make. It is mostly caused by poor construction planning. You may such a mistake also by taking measurements poorly. You should consider all the activities and purposes that you will use your shed for before starting the construction. In that manner, you will be able to come up with a shed design that will suit its purpose and your wishes. One may also consider building a double floor shed to save on your compound space. You wouldn’t want to deny your kids their playing ground! You may also want to construct a different structure in the future then you get hindered due to the little space left or unless you would have to dig deeper into your pockets to modify your shed.
×