“People come in and say they have a ‘standard’ door,” says Renee Genereux of the Brandino Brass team. “But there is no such thing as standard. You need to know your door thickness, how does it swing, what’s the width, what kind of holes do you have.” Avoid multiple visits to the hardware store because you don’t have all of the information and measurements you need. “We give them all of the questions to answer and then they come back with all of it.” Call Brandino Brass ahead of time to ask what you need to know for your visit or check out the sheet below as handy guideline for getting to know your doors and cabinets better.
Pre-drilled holes: replacing the handles on cabinets comes with a few more limitations than selecting completely new cabinetry – namely that the holes might be pre-drilled. You must make sure the center measurements of the existing holes match the spacing of the new pieces. Standard hole center measurements for pulls are 96 mm, 128 mm, 160 mm, 192 mm. When choosing the size of the hardware, keep in mind the scale in relation to the size of your cabinets. Regarding door handles, there is a good chance you may need to increase the size of the bore hole in your door as well. The old standard size was 2-1/8” diameter, and the new standard size is 2-3/8” or 2-3/4”. Tutorials The Quick Door Hanger can help you learn how to do this with a boring bit.

Traditional style cabinetry typically has elaborate detailing, embellishments and moldings. Decorative, ornate hardware is in keeping with this style. Often, interior designers choose drop handles for traditional style doors with coordinating knobs on the drawers. Want a vintage look? Try a handle with a porcelain overlay for a sophisticated farmhouse feel. 
Consult with a contractor or a knowledgeable salesperson about which hinges will work with your doors. If your doors are flush with the cabinets, butt hinges can be used. They are lower in price than others but do not self-close. European hinges are installed on full overlay, frameless or inset doors. They are widely used because of their ease of installation and ability to be adjusted once in place. These hinges self-close. Partial wraparound hardware will support larger doors, but it does not self-close. Several other types hinges are available. The construction of your door, ease of installation and price will need to be considered. .

We also painted our kitchen cabinets white, and I love the crispness of white cabinets. We used latex paint since we ended up doing most of the work while I was pregnant/nursing a newborn and I didn’t want to deal with the oil-based chemicals and odors. It’s definitely not ideal–the hard, oil-based finish is much more practical for kitchens and cabinets. I’m not a perfectionist so it doesn’t bother me (too much!), but I would definitely recommend taking the time to do oil like you did–yours should last forever 🙂
New cabinet door hinges are costly, and you can save a substantial amount of money by repainting old hinges yourself. The preparation work will be the most time-consuming part of the process, but skipping this step could cause you more work later. Don't waste time using all-purpose primer; use a rust-inhibiting metal primer to ensure that the paint adheres. A top-quality paint will give the hinges a professional-looking finish.
You can also create a one-of-a-kind backsplash by purchasing individual tile pieces and putting them together yourself. This could end up being somewhat time consuming — and you’ll need a steady hand to get those measurements exactly right — but the result could be amazing! Just keep in mind, the smaller the tile pieces are, the longer and more intricate this project will become. There are many tutorials online that will show you the tricks of the trade and give you a handle on exactly what to do before your start.

For pulls on a flat front cabinet, the bottom corner of the pull should be equidistant from both sides of the cabinet. For Shaker-style cabinets, the same rules apply as with knobs: center the pull on the vertical stile, with the bottom of the pull even with the top of the horizontal stile (or the top even with the bottom of the horizontal stile, for a lower cabinet). These aren’t hard and fast rules—you may want to adjust them depending on what looks best for your cabinets and hardware—but they’re a good place to start.
When it comes to a quick and easy update that makes a massive difference in the style of your kitchen, hardware ranks right at the top. It can be changed out in just a few hours, yet transforms the entire appearance and feeling of a space. Think of how the perfect necklace tops off a plain dress, or how a precisely kicked field goal can win the Superbowl. When it comes to an easy kitchen update, new hardware can transform a space from ‘blah’ to beautiful!
Picking the perfect cabinets for a project is hard enough, but the effort it takes to research, test and finally decide on the best piece of outward-facing cabinet hardware calls for even further inspection. While the main material for the cabinet door heavily contributes to a kitchen’s character, its hardware serves to accentuate that character further still. A key detail within one of the most important spaces of a residence, cabinet hardware sits squarely at the intersection of form and function, and making the right choice here can elevate the design of the entire kitchen.
Look to the other elements of your kitchen to help you determine the right style for your kitchen hardware. You’ll notice that your cabinets, countertop edges, and lighting fixtures have either square or curved lines. Choose hardware that matches those lines. Curved hardware tends to be more traditional, while square hardware styles are often more contemporary.
Interior Door knobs and levers can range from less than $20 to $200.  You can find cabinet knobs and pulls from less than $2 each to more than $20 each.     Solid knobs and pulls are better quality than hollow hardware.  Although you generally get what you pay for with hardware, if your budget is tighter, you might want to choose less expensive cabinet hardware since it’s relatively easy for homeowners to trade it out for better quality hardware in the future.
Nickel and chrome have about the same level of durability, but chrome is sometimes a bit more expensive.  Brushed or matte finishes hide fingerprints and watermarks better than shiny finishes.  You’ll generally find a lot more hardware options in brushed nickel than in chrome or stainless steel. Poor quality nickel and chrome finishes can peel and flake over time.  Stainless steel, which is usually matte, is the most durable of the silver finishes and as such, is usually the most expensive.  True stainless steel hardware is typically made from a full thickness metal alloy and it’s not just plated on the surface like nickel and chrome are. 
Caring for decorative hardware purchased from Cliffside Industries is easy. Use only a soft cloth dampened with water for cleaning. The most important thing to remember is never to apply any chemicals or abrasive cleaners, including all kinds of soap or detergent. Using these products damages the protective lacquer and may change the appearance of the piece. Any use of chemicals, abrasives or soaps will void your warranty.
Below and above the sink can be two different color schemes. Don’t worry, you can mix and match more than you might think and still obey the laws of symmetry. It can provide a sunny, uplifting splash to have a lighter color above the level of the countertops, such as a warm brass or gold. Particularly with items like faucets and sconces, a lighter color around eye level will create a happy glow.

Knobs only: The benefit of cabinet knobs is that they are typically less expensive than bar and T-pulls, and they only require one hole to be drilled into your cabinetry. A single cabinet knob can be installed on cabinet doors, but you may want to consider placing two knobs on larger drawers. Cabinet drawers are heavier than doors, therefore you may need that extra knob for ease of use. The minimalistic style of using knobs only for your cabinetry can give a very appealing look to your new kitchen.


You don’t need to match your cabinet hardware finish to the rest of your kitchen. This is one area you can add a little bling. For example, we always recommend chrome faucets because chrome is the most durable (and in our experience, although popular, brushed nickel looks dingy and fingerprints are hard to remove), but consider brushed nickel or champagne gold for your cabinet hardware for a nice juxtaposition of metals in your kitchen
I can totally appreciate that.  You’ll notice that these cabinets are also flush with the cabinet frames, which makes the hinges a little less noticeable.  But sometimes, the hinge effect just isn’t quite as charming, and can be more distracting than anything.  A lot depends on what kind of cabinet overlay you’re dealing with and the aesthetic that you’re looking for in this sort of project. 
The timeless classics of solid brass styles, futuristic euro-design aluminum pieces, stunning granite and stainless steel combinations, and novelty handcrafted hardware can all be purchased for a fraction of the cost of replacing your entire set of kitchen cabinets. Give your kitchen a new look with the simple replacement of cabinet hardware. Sprucing up the kitchen has never been easier.
And why shouldn’t we love them? Not only are they sturdy and virtually maintenance-free, but each stone tells a story that is uniquely independent of humankind. That stone making up your cabinet knob was formed in the hot belly of our planet, hardened to a crust on its exterior and then one day miraculously plucked up by a passing human and turned into a part of your daily life.

The chrome and stainless steel can vary some too, but usually not as much, and as often as nickel.  To be safe, get samples from different brands and compare the colors, or get all the hardware that you need for  a single room from one manufacturer.  It’s ok if the nickel in one room doesn’t exactly match the nickel in another room.  It only looks mismatched if the different nickel finishes  are right next to each other in the same room.

Once you’ve selected your new handles and pulls, it’s time to remove all the old ones. Using a drill or screwdriver, slowly back the screws out, then gently pull the old hardware away from the door or drawer front, so as not to damage the finish. Keep the old screws and pulls/knobs together in a plastic baggy so it’s easy to donate or toss them depending on their condition. If you’re going to repaint your cabinet doors, do it now.

Cabinet hardware sizes can vary depending on your own personal design preferences, but you’ll want to choose a size that is both stylish and functional. Bar pull sizes are generally determined by the “center-to-center” measurement (the distance between the two screw holes). If you have pre-drilled cabinetry, you’ll need to buy hardware that fits the existing center-to-center measurement. Otherwise, you’re left to your own devices in choosing the size of your cabinet hardware. Here are a few general guidelines to follow:
I would like to use a hinge similar to the wrap around no mortise Amaroc 3175s but am disappointed to learn the poor reviews ….sloppy….bent…flimsy…not worth it…low qc import. Perhaps they were better in the past! I would be most greatful if you could recommend a better quality hinge of that style. Alternatively,Can the full inset euro cup hinge be adapted to a face frame cabinet by building out the inside lip ^
Apparently I would use MP(?) kind of boards (I forget what the man at HD called it) and it costs about $25 for an 8x4 sheet. I would just measure my cupboard doors, then go in and tell them the measurements, and they would do all the cutting. Then I would just prime the boards, then paint them, then pre-drill the holes for the new hinges, then put them up.
Hi Angie, I think that over time the rub n buff would rub off of the hardware from repeated touching. My hinges still look good two years later, but I can still see places where the finish is starting to rub off and the hinges are almost never touched. I do think that you could update your hardware with a good spray paint though. Just be sure to clean them thoroughly and use a spray primer followed by spray paint. I have update furniture hardware this way that is still going strong almost 10 years later. Good luck!
Our drawer pulls come in a nearly endless variety of materials, styles and finishes. For a contemporary, modern look, try a brushed nickel or chrome drawer pull. If you’re considering a more traditional, classic style, check out our bronze, brass, pewter and black drawer pulls. You’ll be amazed by how a small detail like cabinet hardware can change the look of an entire room. Updating kitchen cabinet hardware, or furniture hardware is also a quick and easy exercise that requires few tools, minimal effort, and is relatively inexpensive.
When choosing your new cabinet color, the options are limitless! White is a popular choice for cabinet colors because it goes with just about everything and will lighten up your kitchen. If the idea of having a kitchen that stands out is your thing, however, then pastels like sage green and light robin’s egg blue will give your kitchen a rustic feel with a subtle pop of color. Additionally, modern colors like bright red and deep gray are bold choices that will certainly have your kitchen making a statement in your home.
What kind of new hardware should you install in your updated kitchen? There are so many choices out there it can be overwhelming. Knobs or Pulls? Nickel or Brass? Will you be able to see the holes from the old hardware? Because I am being asked these questions on a daily basis I’ve put together a general guide to updating hardware and have included some of my favorites to share with you.
×