Order samples, and get a few different types of styles and sizes to decide what will work best for your cabinet doors. It’s helpful to shop with a sample of your cabinet door. Ask yourself: Does my hand keeps sliding on the grip? Is it difficult to pull or get a grasp on it? Does it get greasy from my fingertips? Would I rather have a pull near the fridge but a knob near the stove? You will use this item a ton of times everyday, and you want to feel comfortable with your choice. There’s nothing worse than a cute knob that’s hard to pull open everyday.
Hi Angie, I think that over time the rub n buff would rub off of the hardware from repeated touching. My hinges still look good two years later, but I can still see places where the finish is starting to rub off and the hinges are almost never touched. I do think that you could update your hardware with a good spray paint though. Just be sure to clean them thoroughly and use a spray primer followed by spray paint. I have update furniture hardware this way that is still going strong almost 10 years later. Good luck!
If you decide to install these hinges throughout, you’ll also get the privilege of a handy fine-tune adjustment feature, the BLUMOTION function can be turned on / off with an activation switch so you can accommodate different weights of doors. But the soft-close feature doesn’t have variable adjustments like some of the other soft-close hinge systems. Once the soft-close is turned of you’ll be left with a standard self-close hinge.

Concealed hinges can go in face-frame or frameless cabinets and on any door type—including full overlay, partial overlay, or inset—as long as the doors are at least ½ inch thick. The hinges I'm using are for frameless cabinets with inset doors. To find the hinge that will work with your door type, consult the hinge company's online brochures and customer service line. Then, with the right hinges in hand, follow the steps on the next page to install them.
Hidden hinges, or European (Euro) hinges as they’re called, aren’t difficult to install, and were part of my mini kitchen update. My kitchen is small, and in order to gain storage space, I switched the 30″ upper cabinets to 42″ ones, but kept some of the existing base cabinets. The very shiny, visible hinges on the base cabinets were a dead giveaway as to which cabinets were the moldy oldies. Here are the originals.
Installing new hinges can be easy, but only when choosing the correct cabinet hinge upgrade. The door style, door thickness, and hinge type, all play a role. Once this information is obtained, you should be able to find a soft-close hinge that is a direct retrofit to the existing hinge, or choose one of the many independent dampers and keep your current hinges.
Hi Lonnice – I am so happy you found me again. :-) Did you subscribe and then stop getting my posts in your email? I would like to understand what happened if this is the case. Did you need to subscribe again? I did make a few tweaks about 6 months ago to my subscriber list and would like to pinpoint the problem to why you stopped getting the emails in the first place. Thanks for reading :-)

Prior to making the purchase of your new cabinet hardware, take some careful measurements of the existing hardware. Write down sizes, as well as the spacing of the screws. This should eliminate the need to drill new holes. Accurate measurements are essential to avoid additional work or the need to return and exchange your hardware purchase. In fact, it is a good idea to bring some of your old hardware with you for size comparison purposes, unless you are shopping online for your hardware. In that case, simply have the hardware next to you.


Hardware can have a huge impact on the look and feel of your kitchen, which is why we often recommend replacing hardware as a quick upgrade for rental kitchens, or when you aren’t able to remodel. So when you’re planning a new kitchen, or a re-design, don’t let your hardware be an afterthought. Here are a few guidelines to help you select the right hardware for your kitchen.
Once you choose the style of hardware you want, it becomes easier to choose the right finish. There is a wide variety of cabinet hardware finishes: tarnished, polished, brushed, burnished, oil-rubbed, satin, antique or matte -- just to name a few. Stainless steel handles in a highly polished finish look great in a contemporary kitchen. Pewter and brass look more at home in a traditional setting. Bronze will patina over time, mature in appearance, and will make a bold statement in a kitchen. A black finish is dramatic on a light colored cabinet. Whatever you choose, just make sure the finish on your cabinet hardware complements the overall decor of your kitchen.
We also did that. Our handles are those stainless steel round bars. Loved the look with our white slab door/drawer fronts! Turned out there was big problem with sides of the horizontal drawer pulls snagging pants pockets. So, replaced those with centered flush type steel rectangular pulls that we mounted on the drawers after using router to make mortise holes No more snagging pockets!
Love the drawer pulls and glass knobs. I love the look of glass knobs too! I am so impressed that you spray painted the oven doors? They look great. As for that wooden valance over the sink – I would 86 that in a heartbeat! Nothing says out of date faster than that thing. Wondering if you could cut the ornate part off and maybe paper or paint with your pop color? What about under counter task lighting. I have halogen which are nice but also get very hot. I have seen others with flush mount hardwired fluorescent lighting which work just fine and a lot less expensive.
You don’t need to match your cabinet hardware finish to the rest of your kitchen. This is one area you can add a little bling. For example, we always recommend chrome faucets because chrome is the most durable (and in our experience, although popular, brushed nickel looks dingy and fingerprints are hard to remove), but consider brushed nickel or champagne gold for your cabinet hardware for a nice juxtaposition of metals in your kitchen
A good price for pulls begins at around $12.00 a piece because anything less looks cheap and the quality will be sub-par. Look for cabinet hardware at plumbing or cabinet showrooms. They will have a larger variety and better quality. Look through the displays or catalogs and order several samples in different styles and finishes to compare to the rest of the finishes in your kitchen.
We also did that. Our handles are those stainless steel round bars. Loved the look with our white slab door/drawer fronts! Turned out there was big problem with sides of the horizontal drawer pulls snagging pants pockets. So, replaced those with centered flush type steel rectangular pulls that we mounted on the drawers after using router to make mortise holes No more snagging pockets!
The cons are a few: 1. MDF is heavy in relation to wood or plywood. 2. MDF does not accept screws very well. You must use coarse thread screws and always pre-drill. Apply the hinge screws by using a hand-held screwdriver instead of a screw gun. If you don't, they can strip the hole quickly. 3. Over time the screws will come lose just from opening and closing the doors (just go around every so often and tighten the screws). 4. If water gets into the doors, they will swell and they will need to be replaced so seal them well.
The choice between cabinet pulls and knobs isn’t easy — both come with positives and negatives. Keep in mind that you’ll be using your knobs or pulls every day. Whatever you choose should feel natural in your hand and flow with the décor of the room. You should consider your kitchen’s décor and style, the look you want to achieve, your budget, ease of cleaning, ease of use, the weight of your drawers and more.
Sandra, I’m so glad that I came across your blog! You’ve given so much great information that I can use every day in my job doing kitchen cabinet sales. And then there’s the whole DIY part for me personally! I’m really hoping that you can answer my question, though. I have a customer who is refacing her cabinets. She has frameless cabinets and used to have exposed hinges. She wanted concealed hinges so we had the hinge holes drilled 1″ (center) from the edge. She has her new doors but when she hangs them, there’s a 1/4″ gap between the door and center stile, even after adjusting them. We were using full overlay hinges. Can you advise which type of overlay hinge to use and how to rectify the gap? Thanks so much!

Recessed Pulls mimic the utilitarian style of traditional office cabinetry. They’re built into the cabinet door and can be crafted from the same material to blend in or a contrasting material to highlight their presence. They’re also great for high-traffic kitchens because they don’t protrude from the doors, meaning there is little risk of them snagging on clothing.
The style of cabinet hardware you pick will depend a great deal on the style of your kitchen, and also on the kind of cabinets you choose. Traditionally styled cabinets with more intricate face profiles call for traditional hardware: Cabinets with more simply styled or completely flat faces look best with minimal, streamlined knobs and pulls. Some very modern cabinets don’t require hardware at all: Instead, they have grooves on the edges of the door, or open by push latches.
Thanks for stopping by Lovely Etc! While every effort has been made to ensure the accuracy and effectiveness of the information displayed on this website, Lovely Etc. makes no guarantees as to the procedures and information contained here. The publisher will not be liable for direct, indirect, incidental, or consequential damages in connection with the information displayed on lovelyetc.com. This website is not intended to substitute for advice from a professional. I work hard to be honest and upfront in all of my posts here at Lovely Etc., including sponsored content. Lovely Etc is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. You can read my full disclosure policy here.
You may also have seen cabinets that are so modern and minimalist that they have no knobs or pulls whatsoever—and they look like they’re impossible to open! The trick is, in fact, a mechanism with a spring located on the inside of the cabinet. When you push on the corner of a cabinet, you compress and then release the spring, which in turn pops the cabinet open. In order to close the cabinet, you simply push it closed until you hear the little "click" that means the spring is back in its locked position.
My go-to shop for all of my hardware needs is D.Lawless Hardware – I’ve been using hardware from there for a while now and it’s always the best quality at the lowest prices. They sell so many other awesome products too. Everything from knobs and pulls, drawer slides and systems, to wood appliques, trim, DIY, craft supplies, outlet covers, and so much more! 
I have the exact hinge you mentioned under the caption “Then there are Overlay Hinges where you can see part of the hinge as well.” My problem is that on the 3 sets of doors we have that have no center stile, the doors are pushed too far toward center, therefore not enough space to close properly. Any suggestions other than taking down the doors and planing them? Hate that option on already completely finished doors. Great informative post.

Choosing your kitchen hardware is a great way to customize the look of your cabinetry and drawers. From pulls to knobs and handles, you can get your kitchen cabinet hardware in almost any shape you desire. Choosing the right shape mainly depends on personal preference. I once had handles that we’re a bit snug on my finger when I opened a cabinet. As a result, every time I shut a cabinet, the hardware would tug my finger. After a short time, enough was enough and I switched out my handles for knobs with no further issues. You’d never imagine a small detail such as cabinet hardware type would cause so much frustration, but it truly does make a difference.


Thanks Mary. That is a good question. There is another similar product from DecoArt called Metallic Lustre but I am not sure if it is available in Europe either. (Also, I haven’t used it so I can’t say for sure if I would recommend it.) Also, it isn’t exactly the same but silver spray paint can also work. After cleaning the hinges, spray them with spray primer and then follow up with a spray paint in the metallic finish you want.
You can also create a one-of-a-kind backsplash by purchasing individual tile pieces and putting them together yourself. This could end up being somewhat time consuming — and you’ll need a steady hand to get those measurements exactly right — but the result could be amazing! Just keep in mind, the smaller the tile pieces are, the longer and more intricate this project will become. There are many tutorials online that will show you the tricks of the trade and give you a handle on exactly what to do before your start.
I would like to use a hinge similar to the wrap around no mortise Amaroc 3175s but am disappointed to learn the poor reviews ….sloppy….bent…flimsy…not worth it…low qc import. Perhaps they were better in the past! I would be most greatful if you could recommend a better quality hinge of that style. Alternatively,Can the full inset euro cup hinge be adapted to a face frame cabinet by building out the inside lip ^
Remodeling and customizing your kitchen can be a big project. After planning and designing on the large scale it might be tempting to coast through choosing the cabinet hardware, but high-traffic rooms such as kitchens deserve detailed attention. Choosing the right hardware size requires a balance of style and function. Sacrifice one for the other, and you probably won’t be happy. You’ll be frustrated every time you try to pull open a drawer, or you’ll be disappointed every time you walk into the room.

If you have a removable island or a butcher block in your kitchen, an easy way to make that extra piece look cohesive with the rest of your kitchen décor is by adding coordinating cup and cabinet pulls to drawers and doors. This addition will make your island look purposeful and blend it with the rest of your kitchen cabinets — even if the finish or countertop is different.
Shake a can of spray paint for the full amount of time recommended by the manufacturer. Position the can the recommended distance from the hinges and the screws to spray a light coat of paint. Use steady side-to-side sweeping strokes and maintain a consistent distance from the hinges to ensure a uniform coat of paint. Shake the can frequently while you spray, and spray the sides and edges. Allow the paint to dry for the amount of time recommended by the manufacturer. Apply a second coat of paint and allow it to dry completely.
Based on this, you can then figure out the relationship between your cabinet doors and the frame or exposed edge of the cabinet—do the doors cover part of the frame or edge, or are they inset so that you can see that frame? Depending on whether it’s a single cabinet door or a double cabinet door, the frame or edge might be covered by one or two cabinet doors. 

We were delighted with the professional quality of Meridian’s services. Your team was always responsive and courteous and went out of their way to ensure that our needs were met. Meridian worked closely with our architect to anticipate issues and deal with them in a timely manner. Our home was built in record time and we are very happy with the quality of workmanship.
Installing new Knobs and Pulls are a super easy way to update your kitchen cabinets without spending a fortune. Our kitchen cabinets didn’t even have knobs and pulls installed so I was happy to finally add new hardware. If you’re looking for an easy update for your kitchen by getting new kitchen hardware, you will like my favorite new go-to place for hardware, D. Lawless Hardware.
When you’re choosing cabinet hardware, think about the number of times you’ll touch these pieces every day. If your cabinet pulls look and feel good and function well, you’re sure to derive pleasure from them. Browse our narrowed-down choices, from modern cabinet pulls to traditional knobs. Simply replacing your cabinet knobs is the easiest (and cheapest) way to spiff up a kitchen. Get started here.
Updating certain hardware pieces throughout your kitchen is a simple change that can have a big impact on the overall look of your kitchen. Replacing basic ceramic or plastic knobs on your cabinets with heavy-duty stainless steel or brass knobs can give your kitchen cabinets a whole new refreshed style. Depending on the look you’re trying to achieve in your kitchen, you’ll find metal cabinet knobs that range in aesthetics from simple and contemporary, to ornate and decorative.
Robyn and Sam’s home in Toronto is an all-white, minimal lover’s dream. Intentionally kept simple and streamlined, it has just the essentials. Their kitchen is a great example of a minimal and modern space done right. It’s also a great blank canvas to play with to show you more examples of how just making one small change to your kitchen can make a huge difference!!
Mona Culberson began working on the assembly line at a large manufacturing company in 1983, where she worked her way up into several positions of business responsibility. In 2005, she began a career in roofing, interior design and remodeling. She works daily as a professional painter/home remodeler/handywoman while lending her husband's roofing business a helping hand in her spare time.
I watch you every Sunday morning. I used to help run a construction co. here in Knoxville,TN. I am now my Moms cargiver(87). I lost my dear sweet husband last November. I am trying to sale my house. I am just stressed trying to find replacement wrap-around hinges and pulls for my kitchen and bath. I also am going to replace my laminate tops. Do you have any sources I should check. You two remind me of my sweet dad and me from years ago. Please HELP!!!!!!
Are your cabinets in good condition but old, worn out and dated looking (kind of like me!)? With just a few tweaks you can bring them into this century and get another 10 to 15 years of life out of them. It seems like back in the 70s and 80s kitchen cabinets were built on site and built to last! That’s the case with the kitchen I’m currently dealing with, the entire kitchen was site built, they made one long face frame for an 8’ bank of cabinets – picture all the face frames of your cabinets connected together and installed as one piece, that’s how this kitchen is. Anyway, I was happy with the layout, it’s pretty basic, so to save some money I decided to work with the existing cabinets by removing the valance, replacing the exposed hinges with concealed hinges and adding glass inserts to the upper, upper cabinets – you’ll see what I mean in a minute. If you have ever thought of updating your dated kitchen cabinets, you’ll definitely want to check out this article in all its splendor.
Remodeling and customizing your kitchen can be a big project. After planning and designing on the large scale it might be tempting to coast through choosing the cabinet hardware, but high-traffic rooms such as kitchens deserve detailed attention. Choosing the right hardware size requires a balance of style and function. Sacrifice one for the other, and you probably won’t be happy. You’ll be frustrated every time you try to pull open a drawer, or you’ll be disappointed every time you walk into the room.
Generally speaking, I like to see a combination of knobs and handles/pulls. Knobs or handles for the doors and handles or pulls for the drawers. If you are painting your kitchen, the extra holes can be filled, sanded, and smoothed prior to painting so you can start with a clean slate and choose any hardware for your update. I say “generally speaking” because lately I’m drawn to kitchens that have all handles like this “before” photo of a kitchen we recently updated.
×