Personal preference is very important when deciding whether you want a knob or pull. Your hardware should be in keeping with the style of your kitchen, but it must be comfortable to use, too. Carefully check out the knobs or pulls you are thinking of buying. Place them against cabinetry, then see how they fit your hand. Are they the right size and shape for you?
Pre-drilled holes: replacing the handles on cabinets comes with a few more limitations than selecting completely new cabinetry – namely that the holes might be pre-drilled. You must make sure the center measurements of the existing holes match the spacing of the new pieces. Standard hole center measurements for pulls are 96 mm, 128 mm, 160 mm, 192 mm. When choosing the size of the hardware, keep in mind the scale in relation to the size of your cabinets. Regarding door handles, there is a good chance you may need to increase the size of the bore hole in your door as well. The old standard size was 2-1/8” diameter, and the new standard size is 2-3/8” or 2-3/4”. Tutorials The Quick Door Hanger can help you learn how to do this with a boring bit.
For customers who have homes near the ocean, Cliffside recommends choosing non-metal items such as marble or wood for your projects. Salt air acts as an abrasive, and quickly erodes the lacquer coating. If you absolutely need (or desire) metal hardware, Cliffside recommends solid stainless steel, or certain solid brass finishes such as Black, Polished Brass, or Polished Chrome. Note that, even in optimum indoor conditions, no Cliffside finish has a lifetime guarantee under any circumstances.
DoItYourself.com®, founded in 1995, is the leading independent home improvement and repair website. We welcome your comments and suggestions. All information is provided "AS IS." Website operating problems contact [email protected] Questions of a Do It Yourself nature should be submitted to our "DoItYourself.com Community Forums". Copyright© 1995-2018 MH Sub I, LLC dba Internet Brands. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here.
The timeless classics of solid brass styles, futuristic euro-design aluminum pieces, stunning granite and stainless steel combinations, and novelty handcrafted hardware can all be purchased for a fraction of the cost of replacing your entire set of kitchen cabinets. Give your kitchen a new look with the simple replacement of cabinet hardware. Sprucing up the kitchen has never been easier.

When it comes to finishes, let the rest of the components in the home be your guide. If you are selecting an oil-rubbed bronze artisan faucet, select the matching hardware. Interested in mixing finishes? In today’s home, anything goes. Mixing brass with black iron might be over the top, but pairing brushed nickel with polished chrome can offer a dynamic and attractive contrast.
What if you can’t decide on kitchen hardware? It’s OK to mix and match! Pick patterns and finishes that complement each other and install them in a repeating pattern for a look that is custom to your style. It’s easy to switch up this look as you please. However, this might not impress a potential homebuyer if you choose to sell in the future. Consider updating to more traditional cabinet hardware when it comes time to sell.
By adding hardware you like, you’re literally installing your style into the room — and this will make any accessories you want to add in feel like a part of the kitchen’s design, and not out of place. Of course, not every cabinet + hardware combo is going to work, but see how far you can take it when it comes to choosing hardware outside the traditional style of the cabinets.
I can totally appreciate that.  You’ll notice that these cabinets are also flush with the cabinet frames, which makes the hinges a little less noticeable.  But sometimes, the hinge effect just isn’t quite as charming, and can be more distracting than anything.  A lot depends on what kind of cabinet overlay you’re dealing with and the aesthetic that you’re looking for in this sort of project. 

Over time, switch plates and outlet covers can become dingy and dirty. Replacing your old outlet covers is a quick way to add some new life to your kitchen décor. Switch plates and outlet covers are no longer stuck just being basic functional pieces on your wall. There are many different designs, materials and finishes that can complement the look of any room. Choose switch plates and outlet covers that are made from high-quality metal materials because they are more durable and stylish than basic plastic ones. Plus, you won’t have to worry about kitchen splatter creating unsightly stains on your covers, as this material is super easy to wipe clean!

If you're having trouble selecting the perfect cabinet hardware, for quality and value, you can’t go wrong with a cabinet hardware sample box. The cabinet hardware sample box lets you try out multiple styles and finishes in your home, select the one you love, then visit homedepot.com or your local Home Depot store to purchase the full amount needed.


​If you want to use warm metal like matte brass or gold or copper in your house, but are hesitant because you’re afraid it might go out of style in the next few years, adding warm metal cabinet hardware is a great way to go.  If brass, gold and copper do go out of style in the next few years, most cabinet hardware is pretty simple to replace all by yourself.  If, however,  you decide on a warm metal faucets, door hinges or lighting fixtures,  many of us would have to hire a professional or handyman to replace those items.  But cabinet hardware can easily be switch out by almost anyone.  Just make sure you use standard sized hardware.
We just moved into our home a few months ago and it definitely needed some updating. We decided to start in the kitchen with new appliances. Black stainless beauties 😍 That's when we really noticed how "80's" our kitchen cabinets were! They were in good shape, just wrong color. So we decided to just paint them! The hinges were terribly dirty with a film over them and brass colored. So here's a step by step how I quickly cleaned them and then painted them to match the black stainless appliances....
At Wayfair, we carry a wide selection of cabinet hardware so you can choose from many different options for your home. We carry the best cabinet hardware products, so you can find one that is just right for you. With our large selection of home goods, you're likely to find something that you'll love. If you're looking for where to buy cabinet hardware online, then you'll have no trouble finding a great option on Wayfair!

Knobs are installed with a single screw through one focused entry point on a door or drawer. Pulls are installed with two screws through two points of contact on a door or drawer. Before any holes are drilled, make sure you give detailed instructions to your homebuilder or remodeling professional so that they know the correct type of handle to install on each cabinet door or drawer. You will also need to specify the position of the knob or pull so that they are installed in a consistent manner throughout the kitchen.
Cabinet hardware is a great way to show off your personality and refresh your home. Use classy drawer pulls or colorful cabinet knobs to add style to your bedroom, kitchen or bathroom, or any room in the house. Choose from modern, farmhouse, classic and contemporary styles. Although knobs and pulls can be used interchangeably, knobs are usually used on doors and pulls on drawers.

Hi, Randi! I love all your comments. They are MAKING my day! (Especially how can I be old enough to have a daughter with her own place lol This daughter also has two kids which makes me grandma. Oy. Yes, I’m THAT old!) Anyway, I’m so glad you commented and shared about your kitchen. I’m so glad you’re going for what you want! Sometimes we do indeed get paralyzed but we have to remember who our homes are for…..and that’s US! I think we want to enjoy our kitchen especially, since most of us spend time in there with our families, or at least cooking for our families!


Do you dream of a whole-kitchen remodel straight out of a magazine photo spread? Kitchens begin to look dated more quickly than any other room in your home. Replacing cabinets and countertops is an expensive proposition, but what if you could update them just a bit at little cost? Replacing or adding new cabinet hardware is a great way to update your look with the latest finishes and styles, without breaking open the piggy bank.
Our drawer pulls come in a nearly endless variety of materials, styles and finishes. For a contemporary, modern look, try a brushed nickel or chrome drawer pull. If you’re considering a more traditional, classic style, check out our bronze, brass, pewter and black drawer pulls. You’ll be amazed by how a small detail like cabinet hardware can change the look of an entire room. Updating kitchen cabinet hardware, or furniture hardware is also a quick and easy exercise that requires few tools, minimal effort, and is relatively inexpensive.
When it comes to a quick and easy update that makes a massive difference in the style of your kitchen, hardware ranks right at the top. It can be changed out in just a few hours, yet transforms the entire appearance and feeling of a space. Think of how the perfect necklace tops off a plain dress, or how a precisely kicked field goal can win the Superbowl. When it comes to an easy kitchen update, new hardware can transform a space from ‘blah’ to beautiful!
2) I also note that it does not take long before doors start to sag & the gaps become irregular. Not hard to fix just lie on your back, take all doors off, then tighten everything & replace – then take a cold shower you will need it! It seems the cup sections remain well fixed but the fixing plates on the inside of the cupboard sides just work loose. This ought not to happen but it does & with all the concealed overlay hinges I have seen. Is there an answer? I suspect the hinges are under rated, 2 hinges for doors that typically are nearly 10Lbs may be the reason. Can you please comment.
Handles are sold by the center to center measurement(1). Center to center can be spelled out or the universally known “C/C” could be used. Knobs are sold by the diameter(4) of the knob.The measurement could be in inches or millimeters (MM) CabinetParts has both measurements listed for your convenience. (Tip: to convert millimeters to inches use this formula: MM ÷ 25.4)Here is a diagram showing how these are measured:The overall length(2) and the projection(3) are offered when they are available from the manufacturer.Choosing a finish is going to be entirely up to you. Maybe your cabinets need a satin nickel look for a more modern look or maybe you are in the mood for flat black finished hardware for a more southwestern feel, or maybe weathered copper is your fancy. There are many, many choices for finish to make your kitchen look like a million bucks.The type of handle or knob will depend on what you like or maybe the motif of the rest of the room or house. There are modern, eclectic, or traditional looks and more.Most collections will have a pull and a knob that “match” so you can have the same finish throughout the room. You do not always have to choose pieces from the same collection, just remember to always choose the finish from the same manufacturer. Even though different manufacturers may have finishes that have the same name, they will often vary in the color and shade.These choices will be among the most important of the entire project. A knob and pull will put the finishing touch on the project and be one of the first things people will notice.Sometimes the hardware is noticed before the color or type of cabinet or door.Here is a listing of all of the manufacturers CabinetParts.com offers: Top Konbs, Amerock, Schaub and Co, Atlas Homewares, Notting Hill, Berenson, Jeffrey Alexander, Century Hardware, Hickory Hardware, Laurey Hardware, Liberty Hardware, Elements, Stone Mill Hardware, Hafele, R. Christensen, MNG Hardware, Acorn Mfg.Some of the companies listed above also offer Bath Hardware and Decorative Home Accents that may help complete a project.
I'm a wax girl. Wax always seems to work best for me and I'm ok with reapplying every 6 months or so. With that said, I cleaned them really good krud cutter. It's a great degreaser. Then sanded them first with 120 grit, then 180 grit, and finally 220 grit. Then cleaned them again with the vinegar/water mixture. I always have a spray bottle with the mix handy. Once dried, I primed and painted followed by waxing.
Hanging knobs on a flat-front cabinet is pretty straightforward: You’ll want to position the knob in the bottom corner (for upper cabinets) or top corner (for lower cabinets) of the door. Knobs should be placed equidistant from both sides of the cabinet. A guide like this one can help you to get the measurements right. The exact distance will depend on the look you want and the size of your knobs: Test one or two before you drill a whole kitchen’s worth of holes.
Traditional style cabinetry typically has elaborate detailing, embellishments and moldings. Decorative, ornate hardware is in keeping with this style. Often, interior designers choose drop handles for traditional style doors with coordinating knobs on the drawers. Want a vintage look? Try a handle with a porcelain overlay for a sophisticated farmhouse feel. 
I am taking on more and more cabinet refresh projects (for hire), and still never tire of the transformations.  My latest project is an oak, galley style kitchen, and I’m digging deeper into ideas to make these older kitchens look more modern.  Paint is obviously a big hitter in terms of updating a kitchen, but let’s talk about something else that is equally powerful – cabinet hinges.
Swapping these items out is often easy, and Los Angeles-based designer Betsy Burnham says her clients are frequently surprised at the visual impact of something as simple as carefully chosen hardware. Last summer, she added door pulls made of rope tied in small nautical knots to the built-in cabinets at a California beach house, inexpensively adding a dash of personality to the space.

My home was built in 1940 and the kitchen cabinet hinges and pulls are the hammered black ones. I want to replace same pulls with chrome or polished chrome but cannot find the offset hinges or pulls to fit the holes. I really do not want to have to fill the holes to get another kind. Where can I find these? Have seen them in the past but now I cannot find them. Where should I look?

“When it comes to hardware, it’s hard to shop on the internet,” says Eric. “Some things that look really good online, look cheap in person and vice versa. Some cheap-looking online items look exquisite in person.” The Brandino Brass team says that not only the look, but the feel of door hardware and cabinet hardware is very important. “You don’t want a handle to poke you or have an awkward grip for your hands,” says Renee.
3. Traditionally, your hardware should be the same finish as your kitchen sink faucet. However, mixing and matching metals is on trend in contemporary and transitional homes. Don’t forget to consider your appliances and light fixtures as well. Black appliances look lovely beside bronze or black hardware, while stainless steel and nickel play nicely together. 
When decorating your rustic kitchen, a little bit of detail can go along way! There are many round, cast iron options that have designs that look great in rustic kitchens. If cast iron is too dark for your cabinets, look for an antique pewter finish. The detail within the hardware itself will certainly add to the look. This option also works well for a farmhouse style kitchen, giving it a great country feel.
As latches like these are elements that people come into contact with every day — literally gripping them for support or activating them with a gentle nudge — architects should keep both aesthetics and functionality in mind when specifying these seemingly simple components. To help you as you search for kitchen hardware on Source, here are a few savvy choices that fit well with modern clean spaces; ones that, even when situated in repetitive rows, won’t take attention away from sleek cabinetry design:
Eight staircases?!?Nothing says 'stupid' quite as much as that!Not being critical of the crew, but between the 'historical society' that dictates what you can and can't do (but happily send you the bill) and over the top designs that will prove to be idiotic just makes me shake my head in disbelief.This certainly won't be a house where you can 'age in place'.
Go to the home improvement center and get a 35mm Concealo Hinge mounting kit, it comes with a forstner bit (invented by Benjamin Forstner, in case you didn’t know) and a jig for marking the drill location. You’ll also want to make sure you get 35mm European-style hinges too, but before you buy them you’ll need to determine if you have ½” overlay or full overlay doors. ½” overlay doors overlap the face frames by a ½”, full overlay doors fully overlap the face frame leaving about an 1/8” showing on the outside edge. My doors were all ½” overlay, so I bought eighty 3-way adjustable hinges from eBay. I’m not sure what I was thinking because I ended up with a LOT of hinges left over. Warm up your drill and let’s move on to the next step.
SimplyBeautifulKitchens.com is a participant in the Amazon Services LLC Associates Program and other affiliate programs, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com and other merchants websites. You should always perform due diligence before buying goods or services online. The Owner does not accept payment or merchandise from manufacturers in exchange for writing reviews.
SimplyBeautifulKitchens.com is a participant in the Amazon Services LLC Associates Program and other affiliate programs, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com and other merchants websites. You should always perform due diligence before buying goods or services online. The Owner does not accept payment or merchandise from manufacturers in exchange for writing reviews.

But If you don’t think of your hardware as decorative (but as purely functional) and just want your pulls and knobs to blend into the background, instead of standing out, you can choose hardware that is more subtle.  Choose dark hardware for darker cabinets or silver or clear hardware for white or light cabinets.   Alternatively, you can forgo cabinet pulls and knobs all together, which will give a much more contemporary  look.
So here’s how this works. On the new cabinets I ordered, the center of the hinges were 4 1/2″ from the bottoms and the tops of the doors, so that’s the measurement I used for drilling on my old doors. The original hinges on the old cabinets were placed at about 3″ from the ends, so I didn’t have to worry about the old holes interfering with my new ones.
For Shaker-style cabinets, look for hardware like small round knobs or hardware that feels organic to the craftsman style. I like the idea of brushed nickel or brass for this style of cabinetry. With modern fronts, choose hardware with a sleek and simple design, think matte black or stainless steel, or don’t be afraid to ignore hardware all together and have a custom groove built-in. When planning for a more traditional approach, push the boundaries in your hardware and look for more ornate knobs.
×