Knobs are installed with a single screw through one focused entry point on a door or drawer. Pulls are installed with two screws through two points of contact on a door or drawer. Before any holes are drilled, make sure you give detailed instructions to your homebuilder or remodeling professional so that they know the correct type of handle to install on each cabinet door or drawer. You will also need to specify the position of the knob or pull so that they are installed in a consistent manner throughout the kitchen.


Knobs, handles and hinges may seem like insignificant details, but they can have a major impact on your decor. Give your cabinets a quick facelift by replacing outdated hardware. Stylish hardware can give older cabinets a new look while providing the finishing touch on new cabinets. Choose the perfect hardware for your decor by considering a few important elements.
The cons are a few: 1. MDF is heavy in relation to wood or plywood. 2. MDF does not accept screws very well. You must use coarse thread screws and always pre-drill. Apply the hinge screws by using a hand-held screwdriver instead of a screw gun. If you don't, they can strip the hole quickly. 3. Over time the screws will come lose just from opening and closing the doors (just go around every so often and tighten the screws). 4. If water gets into the doors, they will swell and they will need to be replaced so seal them well.
Consider the style that you have used to decorate your home. Traditional styling indicates a need to use cabinet hardware that has a brushed finish. Pewter, nickel, and polished brass blend well with traditional styling, although other styles will look nice as well. Perhaps you would prefer to contrast the traditional cabinets with some hardware that leans more toward the unique and modern.
I can totally appreciate that.  You’ll notice that these cabinets are also flush with the cabinet frames, which makes the hinges a little less noticeable.  But sometimes, the hinge effect just isn’t quite as charming, and can be more distracting than anything.  A lot depends on what kind of cabinet overlay you’re dealing with and the aesthetic that you’re looking for in this sort of project. 

DoItYourself.com®, founded in 1995, is the leading independent home improvement and repair website. We welcome your comments and suggestions. All information is provided "AS IS." Website operating problems contact [email protected] Questions of a Do It Yourself nature should be submitted to our "DoItYourself.com Community Forums". Copyright© 1995-2018 MH Sub I, LLC dba Internet Brands. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here.

On a day-to-day basis, you probably don’t put much thought into your door handles and cabinet hardware. But, for guests who are seeing them for the first time, these handles make a subtle impression and add to the overall aesthetic of your home. Visitors notice door knobs and cabinet handles in your home because they are items that are touched. Furthermore, since handles and other hardware are three-dimensional elements in your home, there are more artistic possibilities in these details than there might be with the fabric pattern on a sofa or a rug.

Nickel and chrome have about the same level of durability, but chrome is sometimes a bit more expensive.  Brushed or matte finishes hide fingerprints and watermarks better than shiny finishes.  You’ll generally find a lot more hardware options in brushed nickel than in chrome or stainless steel. Poor quality nickel and chrome finishes can peel and flake over time.  Stainless steel, which is usually matte, is the most durable of the silver finishes and as such, is usually the most expensive.  True stainless steel hardware is typically made from a full thickness metal alloy and it’s not just plated on the surface like nickel and chrome are. 
Hidden hinges, or European (Euro) hinges as they’re called, aren’t difficult to install, and were part of my mini kitchen update. My kitchen is small, and in order to gain storage space, I switched the 30″ upper cabinets to 42″ ones, but kept some of the existing base cabinets. The very shiny, visible hinges on the base cabinets were a dead giveaway as to which cabinets were the moldy oldies. Here are the originals.
Most knobs and pulls are only a few dollars apiece but when you consider the sheer number that you’ll need, those costs add up fast. For each standard lower cabinet with two doors and one drawer, you’ll need three pieces of hardware — and two more knobs or pulls for the matching upper cabinet doors. With that in mind, here are a couple of factors to consider:
Then I drilled and drilled. If your drill is a wimpy one, be prepared for this to take a minute…or five.  I realized what a difference a decent drill makes during this process as I had three different ones going–one with a bit to drill the pilot holes, one with the hinge bit and one to use as a screw gun for screwing the screws into the cabinet doors. If you have lots of doors to do, it might be a good idea to borrow a second and/or third one from a friend or you’ll spend lots of time playing musical bits. If you have multiple drills, use the most powerful one for the large hinge-drilling bit.
Consult with a contractor or a knowledgeable salesperson about which hinges will work with your doors. If your doors are flush with the cabinets, butt hinges can be used. They are lower in price than others but do not self-close. European hinges are installed on full overlay, frameless or inset doors. They are widely used because of their ease of installation and ability to be adjusted once in place. These hinges self-close. Partial wraparound hardware will support larger doors, but it does not self-close. Several other types hinges are available. The construction of your door, ease of installation and price will need to be considered. .
Diane, this is so exciting! I can relate as I had a makeover much like yours ( from 70’s brown cabinets to white painted, but pulls are also painted….black.) that was 5 years ago and we are now in the process of making over a back bedroom into a walk-in closet and part of a bathroom/vanity area. I feel as though I should have taken pictures of the progress and posted blogs! I cannot wait for the finished product. I KNOW you must be feeling the same way about the beautiful kitchen you are creating…

On the very last warm-ish day of the year, I laid out all the drawers and doors and got my painting on with my paint sprayer. That thing is the bomb! I had them all primed with Zinsser oil based primer within 15 minutes. Then I waited a couple of hours before painting the final coats. I used Sherwin Williams oil based ProEnamel in Alabaster for the upper cabinets and Sherwin Williams contractor grade oil based paint color matched to Benjamin Moore’s Huntington Green.


You know I have read so many blogs, articles, and posts about this. I have even emailed some hardware companies like Rockler. I have a hinge that I can’t figure them out, I wanted to upgrade them to something more readily available as 5/8 partial inset hinges are hard to find. Rockler suggested replacing the cabinet doors. I spent over seven months working on redoing my kitchen cabinets.


If you think about it, you open your cabinet doors multiple times a day. Over a few years, that can take a toll on those hinges holding your doors in place. Replacing them with hinges that are made from a quality material like solid brass will not only help your cabinet doors function better, but it will make them look better, too! Choose a hinge color that matches the other hardware in your kitchen for a unified look and feel. For easy installation, look for hinges that are adjustable so you can use the same hinges to fit multiple sized doors and cabinets. This small change will make your cabinets look updated and keep them functioning properly for years to come.
Wow, love the progress you’ve made ! Thank you so much for these posts , your ideas are wonderful and I love your style. The drawer pulls are lovely, just what I had in mind, but the glass knobs ? What a lovely idea, I have glass knobs on my interior doors, but hadn’t thought of using them on kitchen cabinets . LOVE it . Can’t wait to see the finished kitchen, what an amazing difference .
But If you don’t think of your hardware as decorative (but as purely functional) and just want your pulls and knobs to blend into the background, instead of standing out, you can choose hardware that is more subtle.  Choose dark hardware for darker cabinets or silver or clear hardware for white or light cabinets.   Alternatively, you can forgo cabinet pulls and knobs all together, which will give a much more contemporary  look.

Swapping these items out is often easy, and Los Angeles-based designer Betsy Burnham says her clients are frequently surprised at the visual impact of something as simple as carefully chosen hardware. Last summer, she added door pulls made of rope tied in small nautical knots to the built-in cabinets at a California beach house, inexpensively adding a dash of personality to the space.


I can totally appreciate that.  You’ll notice that these cabinets are also flush with the cabinet frames, which makes the hinges a little less noticeable.  But sometimes, the hinge effect just isn’t quite as charming, and can be more distracting than anything.  A lot depends on what kind of cabinet overlay you’re dealing with and the aesthetic that you’re looking for in this sort of project. 
Also, experiment with different shapes. Things like knobs, handles, toilet paper holders, towel racks and hinges have a lot of expressive power. Beyond color, though, you should take advantage of their different shapes to accentuate certain features in a room. Pay attention to details like the width of drawers and the height of cabinet doors, and experiment with different shapes to complement them.
When I’m talking about metals, I consider the silver metals as one grouping. So, when you have stainless appliances (silver), a chrome faucet (silver) and brushed nickel lighting (silver) those all count as one metal in my book- SILVER. I personally think Nickel is the most timeless of the metals. Brass has really gained in popularity with interior designers, but is probably a trendier choice. I’ve seen a rise in the popularity of black hardware especially in this age of farmhouse- EVERYTHING (Thanks Chip and Joanna). I think every room in your house should have a little black in it, so if you can bring in the black with your second metal in your kitchen, DO IT!!
×