Good morning and happy Monday, lovely people! I hope y’all had a wonderful Thanksgiving week. Ours was a little on the insane side, but it ended perfectly. We moved to our new house {Memaw’s house} a little over a week ago. It was crazy getting settled just in time to host our family’s Thanksgiving dinner. It was hard without Memaw. Tears came easily and our family time was just really sweet. I’m very thankful.
Kitchen cabinet knobs can really change the look of your cabinets. The best knobs and handles not only suit the cabinet style, but also add to the theme or mood of your kitchen. For example, the warm appeal of hammered copper cupboard handles blends well with rustic kitchens, while the cool sparkle of crystal knobs looks elegant against dark wood cabinets.
Prior to making the purchase of your new cabinet hardware, take some careful measurements of the existing hardware. Write down sizes, as well as the spacing of the screws. This should eliminate the need to drill new holes. Accurate measurements are essential to avoid additional work or the need to return and exchange your hardware purchase. In fact, it is a good idea to bring some of your old hardware with you for size comparison purposes, unless you are shopping online for your hardware. In that case, simply have the hardware next to you.

For pulls on a flat front cabinet, the bottom corner of the pull should be equidistant from both sides of the cabinet. For Shaker-style cabinets, the same rules apply as with knobs: center the pull on the vertical stile, with the bottom of the pull even with the top of the horizontal stile (or the top even with the bottom of the horizontal stile, for a lower cabinet). These aren’t hard and fast rules—you may want to adjust them depending on what looks best for your cabinets and hardware—but they’re a good place to start.


Based on this, you can then figure out the relationship between your cabinet doors and the frame or exposed edge of the cabinet—do the doors cover part of the frame or edge, or are they inset so that you can see that frame? Depending on whether it’s a single cabinet door or a double cabinet door, the frame or edge might be covered by one or two cabinet doors. 

Hello Mr. TretheweyMy name is terry cotto, when we built our beautiful home 16 years ago, in Sierra Madre Ca I had my claw tub installed,( my child hood remembrance) It appears, that the claw legs of the tub were not installed properly, and one leg fell off , tub was slightly tipping to the right. I had a handyman come over and reinstall the claw legs, tighten so this would not happen again. The other day, while I was bathing I noticed the seal of the drain on the outside rubber was not laying properly, plus it was leaking, ( I think this was due to the leg falling off and unbalancing the ring. Well, now I really don't know what to do about that. I believe the thing to do is remove the cover off the top drain , ok, but than what do I have to move the claw tub, impossible. How do I replace the rubber of the outside of the top drain pipe, it appears to be brittle. (Not good)Please answer my questions, and I will hire the handy man again to help me. Thank you. I have learned so much from T.O.H weekly shows, I am a loyal fan at 75. I tell my 80 year old husband, you need to watch these shows with me, and we can do it ourselves, the right way. God Bless you all for the great job your doing, I need to know how to do it right, so it doesn't happen again. a picture would be good, I can see exactly how its done?
I can totally appreciate that.  You’ll notice that these cabinets are also flush with the cabinet frames, which makes the hinges a little less noticeable.  But sometimes, the hinge effect just isn’t quite as charming, and can be more distracting than anything.  A lot depends on what kind of cabinet overlay you’re dealing with and the aesthetic that you’re looking for in this sort of project. 

Love the drawer pulls and glass knobs. I love the look of glass knobs too! I am so impressed that you spray painted the oven doors? They look great. As for that wooden valance over the sink – I would 86 that in a heartbeat! Nothing says out of date faster than that thing. Wondering if you could cut the ornate part off and maybe paper or paint with your pop color? What about under counter task lighting. I have halogen which are nice but also get very hot. I have seen others with flush mount hardwired fluorescent lighting which work just fine and a lot less expensive.
Personal preference is very important when deciding whether you want a knob or pull. Your hardware should be in keeping with the style of your kitchen, but it must be comfortable to use, too. Carefully check out the knobs or pulls you are thinking of buying. Place them against cabinetry, then see how they fit your hand. Are they the right size and shape for you?
I have the exact hinge you mentioned under the caption “Then there are Overlay Hinges where you can see part of the hinge as well.” My problem is that on the 3 sets of doors we have that have no center stile, the doors are pushed too far toward center, therefore not enough space to close properly. Any suggestions other than taking down the doors and planing them? Hate that option on already completely finished doors. Great informative post.
Eight staircases?!?Nothing says 'stupid' quite as much as that!Not being critical of the crew, but between the 'historical society' that dictates what you can and can't do (but happily send you the bill) and over the top designs that will prove to be idiotic just makes me shake my head in disbelief.This certainly won't be a house where you can 'age in place'.

Now comes the fun part, place the point of the forstner bit in the center hole you marked earlier and start drilling, drill the holes ½” deep, that’s the thickness of the bit. The instructions on the back of the kit say “do not drill completely through the door,” Ummm, OK… You’ll want to do this twice on every door, 36” or 42” doors may need 3 hinges each. Let’s backtrack a little here, when you remove the doors mark them and the cabinet box so you’ll know where they go back. Now, do that over and over and over again until all your doors are finished.
If you don’t want to match to your faucet, then think about some of the other components in your kitchen. For example, if you have a black stone countertop, then antiqued metal or even satin black knobs could help tie the room together. Alternatively, base your color and finish choice on the cabinets themselves: Dark hardware to match dark wood or light hardware as a contrast. Choose more rustic finishes like antiqued or hammered metal to go with traditional cabinetry or go with sleek brushed metal for a more modern look.
Concealed hinges can be mounted on the surface of the door or a pressed into a “cup” that is drilled into the door.  These are often called “cup hinges”.  The cup diameter is generally 35mm but that can vary as can the drill depth required to accept the hinge.  Most concealed hinges have built in adjustability so you can slightly change the position of the door without relocating the hinge.
Hinges creak, wear out, discolor or even break over the years. They can also bend. This makes cabinet doors fit poorly. New hinges can update any set of cabinet doors no matter how old they are, and real estate agents often recommend replacing old hardware to help sell your home. Whether you're moving, doing a remodeling job or your kitchen just needs a bit of TLC, you can change your hinges out in one afternoon. Hinges are designed to fit square on the side of the door, making it simple to get the hinge alignment correct -- even if your doors are older than you are.
Finally, one of the more technical parts of cabinet hardware are the ball-bearing slides or tracks and latches that are used to open and close drawers and cabinets. Sliding tracks are what allow drawers to open and close smoothly, and using drawer slides that have soft-close ball bearings allow them to close slowly so that they don’t make much noise or rattle everything inside. Drawer slides are available in side-mount, center-mount, and undermount versions, depending on the amount of space you have between the drawer and the cabinet opening. 
Order samples, and get a few different types of styles and sizes to decide what will work best for your cabinet doors. It’s helpful to shop with a sample of your cabinet door. Ask yourself: Does my hand keeps sliding on the grip? Is it difficult to pull or get a grasp on it? Does it get greasy from my fingertips? Would I rather have a pull near the fridge but a knob near the stove? You will use this item a ton of times everyday, and you want to feel comfortable with your choice. There’s nothing worse than a cute knob that’s hard to pull open everyday.
×